Replacing Light Fixtures

1. Replacing Light Fixtures:

   • Materials Needed: New light fixtures, wire stripper, screwdriver, wire nuts, voltage tester.

   • Instructions:

     1. Turn off the power to the existing fixture at the circuit breaker.

     2. Remove the old fixture by unscrewing or unclipping it from the ceiling or wall.

     3. Connect the wires of the new fixture to the corresponding wires in the electrical box using wire nuts. Use a voltage tester to ensure wires are not live.

     4. Secure the new fixture in place and attach any additional components (shades, covers).

Remember to check local building codes and regulations before starting any renovation project. If you're unsure about any step, consult with a professional or seek advice from your local building department to ensure compliance with legal requirements.